What is the Best Floor Drill Press on the Market?

Floor drill presses are building tools that are most underappreciated yet play a major and critical role when it comes to construction. Like a great movie character, the drill press enjoys less glamour and glory but still holds a pivotal role in the world of building and construction. Drill presses are often precision tools that are used to drill holes, usually at exact locations with the same depths.

Buying guide

There are different drill presses in the market today with different sizes and shapes depending on their place of use. They range from the small, less expensive bench top models to the large, more expensive floor models. The smaller models may cost less than $100 depending on the sizes while the huge models may cost up to $400.

1. JET JDP-20MF


The JDP 20MF floor features a 1.5 horsepower motor that keeps its spinning power at a maximum. It has a work lamp that provides lighting under dark conditions besides the adjustable spindle that provides up to 4200 rpm. It also features a rotating worktable that tilts at 45 degrees making angled drilling a walk in the park.

The featured motor is prewired with a 115 volt outlet and is capable of running off some 230 volt source. In addition to that, the motor comes with a 12 different speeds that are absolutely easy to shift through.

It is relatively easy to adjust the half-inch diameter depth stop thanks to the nut locking feature of the JDP 20MF. And for quick and easy operation, the press drill has an on/off switch conveniently located at the front of the drill.


2. WEN 4225


WEN has persistently made a name for itself in the manufacture of high quality construction material for a long time now. The WEN 4225 is no exception. To begin with, the WEN 4225 is aesthetically attractive making it nice to use and handle. It comes fitted with a stroke that measures 4 inches which makes drilling much easier than you expect.

The stroke cuts through 4 by 4 boards like never before. In addition to that, it is now possible to adjust the speed of the drill tanks to the flexibility of the drill. The speeds can be adjusted from between 280 revolutions per minute (rpm) to a staggering 3300rpm making it one of the most powerful drill presses available.

To further simplify your drilling, there is a work lamp that helps provide lighting when operating under low light conditions. Additionally, there is a precision laser that will guide you as you make those holes at the exact place without missing a mark. Also, a worktable that can be able to tilt to 45 degrees on both sides is provided measuring 12 inches by 12 inches which is more than enough space for your daily drilling. There is a strong support base at the bottom that provides a firm drilling position preventing the drill from moving while you drill.


3. SHOP FOX W1670


Shop Fox has introduced yet another world class product in their wide range of construction materials in the name of the Shop Fox W1670. The simplistic nature of this model makes it one of the most versatile drills one can ever use in drilling. So flexible is the drill that it allows you to drill holes at any angle you find necessary. This is made possible by the tilt table and headstock.

The W1670 allows you to drill holes right at the center of work boards to the tune of 34 inches in diameter. The headstock of this particular model can be tilted both ways, that is, 45 degrees clockwise and up to 90 degrees anti clockwise. This allows you to drill angled holes and even use the drill as a boring machine.

This product saves you plenty of time while using it since it allows you to drill angled or even straight holes without the need to stop and realign the work piece after every single hole. When it comes to drilling speeds, the W1670 boasts of speeds between 550rpm to 3470 rpm. These speeds by any standards will meet your daily drilling requirements. Additionally, it is also easy to switch between different speeds by simply referring to the available chart that gives you the pulley combination for each speed.


4. Jet JDP-17

The Jet JDP-17 is probably one of the simplest drills to use today. The model features a 0.75 hp motor that is capable of powering it via single phase. In addition to that, the motor has a pre-wired 115 volt outlet and can be adjusted to suit other volt sources.

A single revolution of the handle is capable of firing the spindle to travel up to 5 inches. The ground work table is relatively large measuring 19 inches by 14 inches and can be able to accommodate any drilling project subjected to it. Also, the work space has double T slot grooves as well as 4 table slots that offer variety in the kinds of projects that can be worked on.

The Jet JDP-17 allows users to switch between the speeds rapidly thanks to the one-hand belt tensioning operation. When it comes to safety, the power button has a safety key on it as well as a huge button for switching off the drill. Finally, the portability of the drill is not in question as it can be carried from one place to another for storage or for other work purposes quite easily.


Conclusion

The above floor drill presses are just a few of the available options in the market today. They are from different manufacturers which provide users with the luxury of choice. The size and design of each model is a choice to be made by the user, and so is the cost. All in all, these drill presses are your best bet when it comes to floor drilling and will most definitely get the job done in the best way possible.